Grouting Technology & Equipment: Rehab Spotlight

Grouting solutions from Avanti International, Logiball, Aries Industries, Prime Resins and CUES.

Avanti Intl.
AV-100 is an ultra-low viscosity chemically-activated gel. Having the same viscosity as water, AV-100 Chemical Grout has been successfully used for probe grouting, remote packer grouting, curtain grouting, and tube-a-manchette grouting for pre-excavation groundwater control, hazardous waste encapsulation, the prevention of structural movement due to groundwater, and sealing of entire sewer systems and underground transit systems. 281.486.5600,

Logiball manufactures a complete line of multisize reinforced inflatable plugs used for testing bypassing and controlling the flow in gravity sewers. Logiball also manufactures a complete line of carrier packers for the installation of trenchless point repairs (4”-36” pipes). Over the years we have developed state of the art test & seal grouting packers for mainline joints (6”-144”), elliptical pipes, lateral pipe joints (4”-8”) and lateral connection packers (6”-24” mainlines with 4”-6” laterals up to thirty feet from the connection).Over the last decade the Logiball Lateral Packers have been used to test & seal over 100,000 lateral connections. For quality field proven products and fast service contact Logiball. 800.246.5988,

Aries Industries

Aries’ grout systems are designed and built for continuous operations. Aries offers a wide range of outfitting components and configurations to increase the production and reliability of the truck system including electrically driven Triplex CAT pumps for constant pumping pressure. A key feature is the five-part (penta) hose for reliable lateral grouting, larger volume water and mixing tanks for increased grouting capacity and a special winter operation package to increase equipment utilization throughout the year.

Prime Resins
The One Touch Packer saves time and money on injection of chemical grouts and epoxy resins in sound or deteriorating concrete. The 10 mm One Touch Packer is a cost-effective alternative to traditional high pressure injection ports and mechanical packers. Max pressure of the packer is 5,000 psi. The head is designed to break off using a standard hammer, increasing efficiency of finishing the injection holes once injection is complete. 800.321.7212,


The CUES/BUCHEN Lateral/Mainline Sealing Cart is used with standard chemical sealing packers to seal leaking joints in laterals (house to street) and mainlines. It can be used with packers ranging from 4 to 120 inches. The unit consists of two pumps for the grout and catalyst and a manual sealing control panel mounted on a wheeled cart. Joint integrity can be tested with water or air pressure. The unit has an output of up to 7 GPM (total of both pumps), maximum 200 PSIG output pressures, and individual pump regulation with capability of infinite pumping ratios. Two systems are available: one for urethane based grouts only, and one for acrylimide and acrylate based grouts. An air compressor (5-10 SCFM), chemical grout, a water tank and a catalyst tank (plastic container) are the ancillary items required for this system. 800.327.7791,

Related Articles

    Find articles with similar topics