McLaughlin Unveils Vision Underground Utility Locators

McLaughlin revealed a new line of underground utility locators. The Vision locators combine proven McLaughlin technologies to ensure accuracy with new features to help contractors find underground utilities more efficiently.

The Vision product line includes three models: the LX for utility contractors, the FLX2 with fault finding capabilities for power companies and secondary power contractors, and the premium GX2, designed with professional locators in mind.

“Utility contractors face a crowded underground infrastructure, unmarked utility lines and increasingly strict regulations, which makes accurate, timely locating more important than ever,” said Jeff Wage, vice president of sales at McLaughlin. “With the addition of the Vision product line, McLaughlin has an underground utility locating solution for everyone from the new utility contractor who is just starting out to the professional One Call contractor.”

Vision LX locator

The Vision LX locator has a streamlined design and simple user interface. The LX combines the peak locating screen and null locating screen into one display. This allows the user to capitalize on the benefits of both functions — the accuracy of the peak mode and the user-friendliness of the null mode — without toggling back and forth between screens.

Other improvements to the display include an automatic depth and current measurement index, which automatically appears when the locator is positioned over a utility line, and a new compass icon. The compass automatically calculates the peak signal and visually informs the user of the direction of the utility path, making it easier to locate the entire line.

Vision FLX2 locator with fault finder capabilities

The Vision FLX2 has the same features and functions as the Vision LX locator plus secondary and sheaths fault-finding capabilities. Designed with power companies and secondary power contractors in mind, the FLX2 allows contractors to quickly and accurately pinpoint the location of faults in power and telecommunications cables.

Once the locator is connected to the utility line, a contractor can use an A-frame transmitter to find the fault. The contractor places the A-frame transmitter’s prongs into the ground, and the reading is sent to the receiver. If the receiver shows the signal is on the right side of the screen, the contractor proceeds forward along the utility line. If the receiver shows the signal is on the blue side of the screen, the contractor has passed the fault and is alerted to back up. Using this process, a contractor can narrow the location of the fault to within a few inches.

When used for its traditional locating capabilities, the FLX2 has five active frequency modes. Lower- frequency modes provide more accurate locates over longer distances; high-frequency modes use a powerful signal to get through resistant lines, like cast-iron pipes. The FLX2 allows the operator to adjust the frequency based on the needs of the utility line, which provides a more accurate locate.

Vision GX2 locator

The GX2 is the most powerful locator in the Vision product line. Using a 7-watt transmitter the GX2 allows contractors to push the locating signal farther, which is ideal for long fiber runs or gas distribution projects with tracing wires.

To further extend the signal, the GX2 uses a dual frequency mode — that does not require Bluetooth — to simultaneously inject 9.5 kHz and 38 kHz signals into the utility line. When the 38-kHz signal begins to fade, the operator can use the receiver to toggle to the 9.5 kHz frequency and can continue locating.

Because some fiber providers use a custom frequency, the GX2 gives contractors the flexibility to program other frequencies into the locator for added jobsite efficiency.

FOR MORE INFORMATION:
McLaughlin, (800) 435-9340, mclaughlinunderground.com

Related Articles

    Find articles with similar topics